Redsbaby Bounce Manual de Instruções descarregar pdf (Página 13)

Assembling the seat and bumper

1. Take the fabric seat unit and stretch the head rest section over the top

of the circular frame.

2. Pull the rest of the seat unit fabric tightly towards the bottom of the

frame. Take the safety straps and hook over the side of the frame.

3. Turn the frame over and then clip both ends of the safety strap

together. Tighten if necessary.

4. Secure the four Velcro tabs at the bottom of the seat fabric to the

circular frame.

5. Attach the bumper by aligning the ends of the bumper with the two

openings on the circular frame. Gently push down into place until you

hearandfeelarm‘click’onbothsides.

6. If desired, attach the canopy by following the instructions on page 17.

7. To place the seat on the frame, push down gently until you feel and

heararm‘click’.

2 3

WARNING:

• Do not use this seat with any other models of stroller.

• This seat is only approved for use with model: Redsbaby Bounce.

• The maximum weight of a child that can be carried in this seat: 17kgs.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 23 24

Sem comentários

Redsbaby Bounce Manual de Instruções Página 13